trim tilt problem

stingray · 14 November 2007, 11:15

just got suzuki df 140 out of workshop and ptt seems to have packed up,motor runs fine ,solenoid cliks,but no movement of ram, any thought any one.

Downhilldai · 14 November 2007, 11:26

Obvious thought would be PTT oil level. Have you checked this?

stingray · 14 November 2007, 11:41

but would it not still trim down if oil was low ?

chris p · 14 November 2007, 18:53

will trim up till out of oil but wont trim down

Limey Linda · 14 November 2007, 19:21

It is not a solenoid but a relay and it is probably stuck or has bad contacts.
Replace.

stingray · 15 November 2007, 14:51

geting no where any body got workshop manual

Tim M · 15 November 2007, 18:35

Maybe test the motor etc by connecting it straight up to a 12v supply

Downhilldai · 15 November 2007, 19:22

Quote:

Originally Posted by Tim M

Maybe test the motor etc by connecting it straight up to a 12v supply

Errr:

Quote:

Originally Posted by stingray

.....motor runs fine.....

Pete7 · 15 November 2007, 21:25

Before you try anything else has the manual overide screw on the side of the transom saddle been slackened off?

Pete

stingray · 16 November 2007, 16:13

sorry, the motor that runs pump does not seem to cut in