Reply
 
Thread Tools Search this Thread
 
Old 16 October 2006, 13:58   #1
Member
 
Country: UK - England
Town: Hampshire
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki 175hp
Join Date: Oct 2006
Posts: 34
Suzuki - 175 or 200?

I am just in the mist of thinking about a new rib, and have pretty much decided on the boat, but quite stuck on the engine. I am not that fussed about top speed, but think it should reach 40mph.

The boat is a ribcraft 6.5m. Took one out at the weekend with Suz 150 on it. Top speed 38mph, does anyone have an idea of what a Suz 175 would hit?

But then I am told the 175 can sound as if it is being pushed, as it is the same block as the 150, so maybe go for V6 200hp! But then stepping up to a V6, that will be heavy and maybe guzzle more fuel at mid range? seems like quite a step

Any advise welcome!
__________________
dwalters is offline   Reply With Quote
Old 16 October 2006, 14:25   #2
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
How about the e tec lighter, I been looking at a new boat & chase this over the Suzuki, also tried the 150 Verado yesterday very heavy steering & horrible noise then pushed!!
__________________
Nick Hearne is offline   Reply With Quote
Old 16 October 2006, 16:15   #3
Member
 
Country: UK - England
Town: midlands /lymington
Boat name: bit o blue
Make: solent
Length: 6m +
Engine: suzuki 175
MMSI: one day
Join Date: Oct 2005
Posts: 64
Quote:
Originally Posted by dwalters View Post
I am just in the mist of thinking about a new rib, and have pretty much decided on the boat, but quite stuck on the engine. I am not that fussed about top speed, but think it should reach 40mph.

The boat is a ribcraft 6.5m. Took one out at the weekend with Suz 150 on it. Top speed 38mph, does anyone have an idea of what a Suz 175 would hit?

But then I am told the 175 can sound as if it is being pushed, as it is the same block as the 150, so maybe go for V6 200hp! But then stepping up to a V6, that will be heavy and maybe guzzle more fuel at mid range? seems like quite a step

Any advise welcome!
I have a solent 6.5 with the 175
55mph 4 up and 160 ltrs
On ave it uses 28 ltrs per hour (wot will be more)
Iam very pleased very quite

steve
__________________
may the force be with you
steve b is offline   Reply With Quote
Old 16 October 2006, 16:50   #4
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Go on, getn the V6

Nasher's sounds GLORIOUS!
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 16 October 2006, 19:09   #5
Member
 
Country: UK - England
Town: London
Make: Osprey ViperMax
Length: 6m +
Engine: 200HP Etec
Join Date: Jun 2003
Posts: 80
Ribcraft

I have a new Ribcraft Sport 650 with 175 Suzuki, she makes 44 - 45 knots at 6100 rpm with a 23 pitch prop.

I don't think theres any need for a V6 on this boat as if you floor the 175 when water skiing it will pull your arms off .........

P.S. Its for sale if anyones interested
__________________
Davidgriffiths is offline   Reply With Quote
Old 16 October 2006, 22:18   #6
Member
 
Nasher's Avatar
 
Country: Other
Town: Principalite d'Chaos
Boat name: The Nashers Revenge!
Make: Windsor Brothers
Length: 6m +
Engine: Optimax 225
MMSI: "Mmmmm SI" she said!
Join Date: Jan 2004
Posts: 4,828
Matt

Remember my 200 is the 2.7l V6 two-stroke EFI, not the four-stroke I presume Dwalters is thinking of, which would be, shall we say, a little quieter.

Glad you like the sound as much as I do, kind of encourages you to run it up on the muffs just for the sake of it.
Its light too.

Go on, fit the 200, you will want one anyway when you get used to the 175.
I'm waiting for Codprawn to fit a Verado so I can have his 225HP

Nasher.
__________________
Nasher is offline   Reply With Quote
Old 16 October 2006, 22:49   #7
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
<snigger>

Yeah yours does sound good on muffs.

He didn't specify 4 or 2-stroke so you're probably right.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 16 October 2006, 22:51   #8
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Quote:
Originally Posted by Nasher View Post
Matt

Remember my 200 is the 2.7l V6 two-stroke EFI, not the four-stroke I presume Dwalters is thinking of, which would be, shall we say, a little quieter.

Glad you like the sound as much as I do, kind of encourages you to run it up on the muffs just for the sake of it.
Its light too.

Go on, fit the 200, you will want one anyway when you get used to the 175.
I'm waiting for Codprawn to fit a Verado so I can have his 225HP

Nasher.
A Verado??? Don't swear at me!!! IF I change my lovely engine it will be another 2 stroke - prob the Mercury Racing 300xs.
__________________
codprawn is offline   Reply With Quote
Old 17 October 2006, 07:40   #9
Member
 
Country: UK - England
Town: Hampshire
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki 175hp
Join Date: Oct 2006
Posts: 34
Thanks

Thanks for your help, think i'll probably go for the 175hp four stroke, if it hits 40 i'm happy.
__________________
dwalters is offline   Reply With Quote
Old 17 October 2006, 19:41   #10
ADS
Member
 
Country: UK - England
Town: Dorset
Length: 4m +
Join Date: Oct 2003
Posts: 1,410
I reckon you would be able to get the 200HP cheaper than the 175HP or at least at the same price. The 175HP is a newer model so may be more difficult to get hold off.
Get the V6, theres no replacement for displacement
__________________
ADS is offline   Reply With Quote
Old 17 October 2006, 20:00   #11
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by codprawn View Post
A Verado??? Don't swear at me!!! IF I change my lovely engine it will be another 2 stroke - prob the Mercury Racing 300xs.
Bolt another 225 next to the one you already have and you'd have a proper 8m Rib.
__________________
Mollers is offline   Reply With Quote
Old 17 October 2006, 20:40   #12
Member
 
Country: UK - England
Town: Southampton
Boat name: Darwin
Make: Ribeye
Length: 6m +
Engine: 150hp Yamaha
Join Date: Jul 2004
Posts: 382
RIBase
Perhaps this may help! The school boat - a Ribcraft 7m - was originally specked with the 175 Suzi. It ran Ok, topping out at around 38knots. Now for reasons beyond everybodies control, the engine was swithced to a 200 V6.

What a diffrence. OK, top speed had gone up to around 43 knots, but the sheer grunt mid range is startling. Between 4,000 and 5,000 RPM it just gets up and goes. In terms of fuel consumption, it's the same if not slightly better in certain conditions - just becuse it's not running so hard and it's easier to stay on the plane in "tougher" seas.

I've driven the 7.8 metre Ribcraft with the 250 Suzi and that's nice, but I think you'l be more than happy if you go for the 200 in preference. It's also very quite and very smooth.

I also spent some time at SIBs (Try A Boat)helming Ricraft's 10.5 metre with twin 250 Suzis - now that was awesome. Just a shame the weather was so good for most of the show - only really showed it's full potential when we had a F6 and the other boats were being put to bed!

__________________
https://www.5starmarine.co.uk
Solent Ranger is offline   Reply With Quote
Old 17 October 2006, 21:01   #13
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Nice looking boat - especially with that stealth radar dome on the A frame!!!
__________________
codprawn is offline   Reply With Quote
Old 17 October 2006, 21:02   #14
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Quote:
Originally Posted by Mollers View Post
Bolt another 225 next to the one you already have and you'd have a proper 8m Rib.
Don't want to upset the balance - unless you know of a nice DT225 contra rotation for sale???
__________________
codprawn is offline   Reply With Quote
Old 18 October 2006, 11:33   #15
Member
 
Country: UK - England
Town: Hampshire
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki 175hp
Join Date: Oct 2006
Posts: 34
The 200

Quote:
Originally Posted by Solent Ranger View Post
Perhaps this may help! The school boat - a Ribcraft 7m - was originally specked with the 175 Suzi. It ran Ok, topping out at around 38knots. Now for reasons beyond everybodies control, the engine was swithced to a 200 V6.

What a diffrence. OK, top speed had gone up to around 43 knots, but the sheer grunt mid range is startling. Between 4,000 and 5,000 RPM it just gets up and goes. In terms of fuel consumption, it's the same if not slightly better in certain conditions - just becuse it's not running so hard and it's easier to stay on the plane in "tougher" seas.

I've driven the 7.8 metre Ribcraft with the 250 Suzi and that's nice, but I think you'l be more than happy if you go for the 200 in preference. It's also very quite and very smooth.

I also spent some time at SIBs (Try A Boat)helming Ricraft's 10.5 metre with twin 250 Suzis - now that was awesome. Just a shame the weather was so good for most of the show - only really showed it's full potential when we had a F6 and the other boats were being put to bed!

I think what your syaing is that for ease I should be going for the 200 V6, on the basis of top speed, probably better fuel efficiency than the 175hp, no much more money, and better mid-range. I guess it confuses me why people go for the 175hp if that is the case. There must be a draw back in going for the V6, surely??!!

Many thanks for your comments by the way, very helpful
__________________
dwalters is offline   Reply With Quote
Old 18 October 2006, 12:28   #16
Member
 
Country: UK - England
Town: Southampton
Boat name: Darwin
Make: Ribeye
Length: 6m +
Engine: 150hp Yamaha
Join Date: Jul 2004
Posts: 382
RIBase
Quote:
Originally Posted by dwalters View Post
I guess it confuses me why people go for the 175hp if that is the case. There must be a draw back in going for the V6, surely??!!

Perhaps I should have added that rib is coded for 8 and that when you add the weight of fuel to a full boat, then the 175 frankly was not up to the job. If you are only going to be "lightly" loaded then the 175 may well suit your needs. It is a good engine!

But, if you can afford it then I'd go for the 200! When specking the boat, given that it was going to be used as a training boat as well, then it was felt the 175 which was lighter and only 25HP less would do the job. The extra torque on the 200 is worth it!
__________________
https://www.5starmarine.co.uk
Solent Ranger is offline   Reply With Quote
Old 18 October 2006, 12:43   #17
Member
 
Country: UK - England
Town: Hampshire
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki 175hp
Join Date: Oct 2006
Posts: 34
Quote:
Originally Posted by Solent Ranger View Post
Perhaps I should have added that rib is coded for 8 and that when you add the weight of fuel to a full boat, then the 175 frankly was not up to the job. If you are only going to be "lightly" loaded then the 175 may well suit your needs. It is a good engine!

But, if you can afford it then I'd go for the 200! When specking the boat, given that it was going to be used as a training boat as well, then it was felt the 175 which was lighter and only 25HP less would do the job. The extra torque on the 200 is worth it!
It seems to make sense then I must say to go for the 200hp. My only other concern is the weight. The 175hp is the same weight as the 150hp (220kg) and I tried the 150hp at the weekend, and the boat seemed well balance. If you stick the 200hp on there, its 263kg. I think you have a Ribcraft 6.8m, I just wonder whether the 200hp on the 6.5m would be too much and a bit tail heavy.

Thanks
__________________
dwalters is offline   Reply With Quote
Old 18 October 2006, 12:54   #18
Member
 
Country: UK - England
Town: Southampton
Boat name: Darwin
Make: Ribeye
Length: 6m +
Engine: 150hp Yamaha
Join Date: Jul 2004
Posts: 382
RIBase
Quote:
Originally Posted by dwalters View Post
It seems to make sense then I must say to go for the 200hp. My only other concern is the weight. The 175hp is the same weight as the 150hp (220kg) and I tried the 150hp at the weekend, and the boat seemed well balance. If you stick the 200hp on there, its 263kg. I think you have a Ribcraft 6.8m, I just wonder whether the 200hp on the 6.5m would be too much and a bit tail heavy.

Thanks

It's actually a 7metre - but you are based in Hampshire I see - why not come down and have a go!

When the 175 had a problem it was replaced temporally with a 150 (a development engine) and there was not a lot of difference. As to weight, the 150 and 175 are the same engine - as is the case with the 200, 225 and 250 on the V6's.

The 6.5 will go well on the 175, but your original question was regarding the 200 as an alternative and just posted my thoughts. Having spent some time with both engines I know my preference.

I have also had experience on the 140 Suzi as well, and that is also a great engine on the right boat.
__________________
https://www.5starmarine.co.uk
Solent Ranger is offline   Reply With Quote
Old 18 October 2006, 13:12   #19
Member
 
Country: UK - England
Town: Hampshire
Make: Ribcraft 6.5
Length: 6m +
Engine: Suzuki 175hp
Join Date: Oct 2006
Posts: 34
Quote:
Originally Posted by Solent Ranger View Post
It's actually a 7metre - but you are based in Hampshire I see - why not come down and have a go!

When the 175 had a problem it was replaced temporally with a 150 (a development engine) and there was not a lot of difference. As to weight, the 150 and 175 are the same engine - as is the case with the 200, 225 and 250 on the V6's.

The 6.5 will go well on the 175, but your original question was regarding the 200 as an alternative and just posted my thoughts. Having spent some time with both engines I know my preference.

I have also had experience on the 140 Suzi as well, and that is also a great engine on the right boat.
Very grateful for your comments thanks. And thank you for your kind offer. From what I am told ribcraft don't make a straight 7m, its either a 6.8m or 7.5m, obviously makes a big differrence on which it is, as to whether the 200hp (prob preferred engine) is too heavy for the boat; being 7 stone heavier than the 175hp

Many thanks
__________________
dwalters is offline   Reply With Quote
Old 18 October 2006, 13:28   #20
ADS
Member
 
Country: UK - England
Town: Dorset
Length: 4m +
Join Date: Oct 2003
Posts: 1,410
Quote:
Originally Posted by dwalters View Post
Very grateful for your comments thanks. And thank you for your kind offer. From what I am told ribcraft don't make a straight 7m, its either a 6.8m or 7.5m, obviously makes a big differrence on which it is, as to whether the 200hp (prob preferred engine) is too heavy for the boat; being 7 stone heavier than the 175hp

Many thanks
Both the 6.3M and the 6.8M Ribcraft are rated to 225HP, so I can forsee no problem having a 200HP on either, Ribcraft know what they're talking about.
http://www.ribcraft.co.uk/specifications.html

225 Honda on this 6.8, prob needs the power though when its full of divers!
http://www.boatsandoutboards.co.uk/view/F43823
__________________
ADS is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 01:14.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.