stern power leg

[Paul F]

1 of the trim hose have parted inside the boat, on removal the stainless pipes silver soldered nipple also parted.
This pipe goes to a throught transom pipe fitting.
I have removed lock nut from outside of transom.
Will this fitting knock through or is it threaded as its a bit tight and need to get that and ss pipe out for repair.
Paul

[PeterR]

Hi ,Just for peace of mind check the others.If you get stuck i think i have a set of four secondhand ones as spares for me.I would call Larncing marine.Poeple do say they are expensive but you will find there advice free.I havent got any pipe just the hoses.I have a stern drive downloaded copy manuel i,ll look at the pictures to see if it will indicate how it comes out

[PeterR]

The picture shows what looks like to me the shaft that goes through is smooth with no thread on it it is only threaded at the end for a locking nut and the hose to connect to the end.Hopefully a photo on my table will follow

[Paul F]

Cheers pete for that info.
Paul

[Paul F]

not to worried about the hoses thanks as i can get them made locally.