Need a mariner parts supplier locally?

[jezza2011]

Hi Does anyone know of a mariner/mergury dealer in the midlands or northans area.

Just checked over my mariner 75 2 st and noticed plug 3 was clean and wet but not oily like the other 2 should and are.

may need some parts soon as it looks like no3 is not fireing or at lease not as it should be

[Mollers]

Originally Posted by jezza2011

Hi Does anyone know of a mariner/mergury dealer in the midlands or northans area.

Just checked over my mariner 75 2 st and noticed plug 3 was clean and wet but not oily like the other 2 should and are.

may need some parts soon as it looks like no3 is not fireing or at lease not as it should be

Get hold of Bedajim, he uses a good Mergury man in your logality.

[bedajim]

Originally Posted by Mollers

Get hold of Bedajim, he uses a good Mergury man in your logality.

GB watersports in Peterborough ask for Greg top bloke

[Portholme]

seconded on GB watersports

have you tried Brian Wallis at Roe Farm, Cogenhoe?

[Turbodiesel]

Or Black Dog Marine!. Ribnet members get 10% discount on all parts!

[jezza2011]

Hmm investigation further seems all plugs are fine.
Good spark on all cylinders.
but still no 3 seems clean. very clean. far too clean.
its seems to be running fine.
but no1 and no2 are oily after about 10 mins of idle no 3 nice and clean.

any sugestions

[Turbodiesel]

Originally Posted by jezza2011

Hmm investigation further seems all plugs are fine.
Good spark on all cylinders.
but still no 3 seems clean. very clean. far too clean.
its seems to be running fine.
but no1 and no2 are oily after about 10 mins of idle no 3 nice and clean.

any sugestions

If its running fine then leave it alone!!!

[jezza2011]

Yep, thats my thoughts on it now. Fix on fail. :-)

it revs up freely and although a little lumpy at tick over it performed very well out in the solent 2 weeks ago . Not a murmour.

so its hands off the out board and tools locked away.

Well untill i think about it again. :-)