Go Back   RIBnet Forums > RIB talk > Engines & props
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 08 November 2010, 12:46   #21
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
Quote:
Originally Posted by jambo View Post
Hi Paul, hows the other black & yellow doin?
Well in answer to your question it depends!! On all the usually variables load sea state and bodies, but if all are good then she will do 45knts ok.
I take it your ribs up for winter now and that will save you being the butt of all the jokers?

J
All good since we found the chafed wire. Out the water getting serviced for free by barrus!

Ours does just over 50mph with 175hp, I'd have thought a narrower and shorter hull with 150 would exceed that.

Never the butt of jokes, just the target of jealous comments!

Actually got a few good runs in all things considered. Including porth dinllaen.
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 08 November 2010, 16:11   #22
Redbay supporter
 
wiLlfish's Avatar
 
Country: UK - England
Town: onn de moov
Boat name: bote
Make: kevvin
Length: 4m +
Engine: jett dryve
Join Date: Jan 2010
Posts: 455
Quote:
Originally Posted by Downhilldai View Post
46kts on a good day.
iz dat dowenhill daI?

wIlf
__________________
fuk mee crismus leeve wiv noe ankul tagg

Wher doo I beegin?😃
wiLlfish is offline   Reply With Quote
Old 08 November 2010, 16:40   #23
Member
 
Country: UK - Scotland
Boat name: Wildheart
Make: Humber/Delta Seasafe
Length: 5m +
Engine: Merc 60 Clamshell
MMSI: 235068449
Join Date: Apr 2007
Posts: 4,671
Quote:
Originally Posted by Mollers View Post
I wouldn't bother. One trunk will cope with a hell of a lot of water. It's the annoying last 2" of water that you need rid of, an auto blige pump is the way to go, especially if you have a decent well.
EH? How high off the floor are your trunks?????? This may be a humber feature, but the lowest point of the I/D of mine is at floor level. Net result, I really should put a grille over the hole to stop me loosing dropped stuff as well as water!

If you have the trunks as far out from the centreline as poss, a gentle turn to port or Stbd then again the other way will take all the water out. If the sea is too crappy for gentle ambling turns, a half inch of brine lurking at the back will be the least of your worries!

No well, no pump, 2 trunks for me.
__________________
9D280 is offline   Reply With Quote
Old 08 November 2010, 16:54   #24
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by 9D280 View Post
EH? No well, no pump, 2 trunks for me.
My pump is actually still in it's box.

The PITA of not having a pump is when there's water in the boat, you're loading bods and dry stuff and there's a mile of 6knt speed limit before the trunk/trunks come out to play.
__________________
Mollers is offline   Reply With Quote
Old 08 November 2010, 17:09   #25
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by Mollers View Post
My pump is actually still in it's box.

The PITA of not having a pump is when there's water in the boat, you're loading bods and dry stuff and there's a mile of 6knt speed limit before the trunk/trunks come out to play.
Seconded. It's a long way out of Poole harbour while you're trying to stop the gear you're stowing getting wet...
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 08 November 2010, 17:49   #26
RIBnet supporter
 
gotchiguy's Avatar
 
Country: UK - England
Town: Dinard, Brittany
Boat name: Into the Red
Make: Osprey Vipermax
Length: 7m +
Engine: Evinrude E-tec 250HO
MMSI: 235 076 114
Join Date: Apr 2009
Posts: 1,957
RIBase
Quote:
Originally Posted by Mollers View Post
My pump is actually still in it's box.

The PITA of not having a pump is when there's water in the boat, you're loading bods and dry stuff and there's a mile of 6knt speed limit before the trunk/trunks come out to play.
We've got exactly the same problem (well obviously) although worse 'cos its on the mooring. Only way is to put all the gear on the anchor locker, cast off and go for a minute spin on the plane amongst the boats. Most weve had it water lapping right up to the anchor locker so ~12 inces+ at the back. With the trunk down it goes down mighty quick though
__________________
gotchiguy is offline   Reply With Quote
Old 08 November 2010, 19:27   #27
Member
 
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by wiLlfish View Post
iz dat dowenhill daI?

wIlf
No, you nobend, it's on a good day, which is when Ms DHD is back at home and I'm owt on de fkin bote alown
__________________
Downhilldai is offline   Reply With Quote
Old 08 November 2010, 20:08   #28
Member
 
Country: UK - England
Town: Southampton
Boat name: SMH Rib / War Shot
Make: Ribtec / Scorpion
Length: 4m +
Engine: 100hp Yam/150hp opt
Join Date: Sep 2003
Posts: 2,069
RIBase
V Low freeboard on our 6.5 Scorpion. 150hp opti longshaft.

With fat blokes on the 6 jockeys, all aft, water can wash into the stern when at rest. 2000gph pump in the well sorts that though most of the time.

To reduce the water splashing in we've built up the transom cut out either side of the ob with self adhesive foam blocks. As they're squashy can also get one between the saddle sides under the engine. Works a treat.
__________________
Searider is offline   Reply With Quote
Old 08 November 2010, 22:20   #29
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
Personally if I had a 6m boat with 6 on board and water washing over the back I'd sell it. That's a crap design or over weighted stern from too large an engine. (unless all six are over 18 stone in which case get slimmer friends or diet)

Our sr did it in reverse with the max 90 hp but not at rest unless a bog wave came.
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 09 November 2010, 08:39   #30
Member
 
Country: UK - Scotland
Boat name: Wildheart
Make: Humber/Delta Seasafe
Length: 5m +
Engine: Merc 60 Clamshell
MMSI: 235068449
Join Date: Apr 2007
Posts: 4,671
Quote:
Originally Posted by Mollers View Post
The PITA of not having a pump is when there's water in the boat, you're loading bods and dry stuff and there's a mile of 6knt speed limit before the trunk/trunks come out to play.

I knew there was a reason I could live with the weather up here!
__________________
9D280 is offline   Reply With Quote
Old 09 November 2010, 08:42   #31
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by 9D280 View Post
I knew there was a reason I could live with the weather up here!
Yep, we're as soft as puddin' down here.
__________________
Mollers is offline   Reply With Quote
Old 09 November 2010, 11:15   #32
RIBnet supporter
 
bedajim's Avatar
 
Country: UK - England
Town: Rutland
Length: no boat
Join Date: May 2006
Posts: 2,500
Quote:
Originally Posted by HUMBER P4VWL View Post
Our sr did it in reverse with the max 90 hp but not at rest unless a bog wave came.
Those bog waves are real stinkers
__________________
bedajim is offline   Reply With Quote
Old 09 November 2010, 11:19   #33
Member
 
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by bedajim View Post
Those bog waves are real stinkers
Yes, they really leave you in the $hit
__________________
Downhilldai is offline   Reply With Quote
Old 09 November 2010, 11:36   #34
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
ooops

where's bogmonster when you need him?
__________________
HUMBER P4VWL is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 10:21.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.