Reply
 
Thread Tools Search this Thread
 
Old 01 August 2016, 06:23   #1
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
Ideal Cruising RPM's

I know it's a case of how long is a piece of string....but that said, what rpms do you guys normally cruise at.

My outboard is a 2012 150 Yamaha Fourstroke.

I cruise at 4,000 rpms, but would truthfully prefer to be at around 4,500, but it sounds like I am thrashing it and I don't want to tear it up. It does sound much sweeter at 4k, but hauls ass better at 4.5.

Thoughts?
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 01 August 2016, 07:22   #2
Member
 
Country: UK - England
Town: Liverpool
Length: no boat
Join Date: May 2015
Posts: 218
A short storey long!! We decided passengers don't chat and stop enjoying the cruising experience above 25knots, between wind, waves thumping etc. 20knots is a little slow, so for us its 23/23 knts at 4250 (depending on prop) Also when you say best cruising speed do you mean best for range? I would have thought 4250 is probably best range revs also (approx).nik
__________________
matata is offline   Reply With Quote
Old 01 August 2016, 08:05   #3
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
The first thing you need to determine is whether you are correctly propped. Can you reach your WOT range with your normal load? If so, it's a case of what's comfortable/economical for your rig. I have a Suzuki DF140a lean burn. The most economical rev range is around 4500 which just happens to be around 25kn. I am propped spot on at 6000rpm WOT. If you are correctly propped you won't be stressing your engine at 4500, assuming your engine's WOT is around the 5500-6000 mark


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 01 August 2016, 08:15   #4
Member
 
Country: Australia
Town: Dalmeny
Make: zodiac
Length: 5m +
Engine: outboard
Join Date: May 2015
Posts: 1,200
My yam 4 stroke has a max rpm of 6300, I have no problems running at 4700 for long periods to get offshore. An average day on the water is normally over 100km.

According to Yamaha Au these engines are designed to run at even higher rpm for long periods at a time without causing any problems. Why not ask a reputable Yamaha dealer or Yamaha UK.


Jon
__________________
jonp is offline   Reply With Quote
Old 01 August 2016, 09:15   #5
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
Quote:
Originally Posted by jonp View Post
Why not ask a reputable Yamaha dealer or Yamaha UK.
When there's such a plethora of informed members on here
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 01 August 2016, 09:33   #6
Member
 
Join Date: Jun 2010
Posts: 2,934
Your sig says it is a merc 150?

If it is a yam then Davie if the one to ask on here for an informed answer.
__________________
Xk59D is offline   Reply With Quote
Old 01 August 2016, 09:52   #7
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
It also depends on your boat as to what power is needed to keep you on the plane at that "relaxed sweet spot". As you say yourself, you'll "feel" when it's right or stressed.

The same 150hp engine will vary in terms of the sweet spot from boat to boat I'd imagine.

We cruise at 3800-4200 with a 2 stroke 175 optimax on a 6.3 rib, depending on load. My mate has the same engine on a bayliner type cuddy 6.5m and needs to sit at about 4600-4800 to "feel" relaxed, as there's much more weight.

And all that varies on the prop you have on, as others have said.
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 01 August 2016, 10:19   #8
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
Quote:
Originally Posted by Xk59D View Post
Your sig says it is a merc 150?

If it is a yam then Davie if the one to ask on here for an informed answer.
Haha, it is a merc. I don't know why I said Yamaha, perhaps it's a subliminal desire to own a yammie or a sign that early morning posting needs to be better monitored.
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 01 August 2016, 10:35   #9
Member
 
Country: UK - England
Town: Leicester
Length: 5m +
Engine: 135hp Mercury
Join Date: Sep 2013
Posts: 1,408
Quote:
Originally Posted by Pikey Dave View Post
The first thing you need to determine is whether you are correctly propped. Can you reach your WOT range with your normal load?
^^^This.
__________________
paintman is offline   Reply With Quote
Old 01 August 2016, 13:53   #10
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
I will get out on the boat next week and see what wot is, then repost.
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 01 August 2016, 13:58   #11
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
Quote:
Originally Posted by Paul_S View Post
I will get out on the boat next week and see what wot is, then repost.

👍 need to get the fundamentals right before you start tweaking😄


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 01 August 2016, 18:03   #12
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Ideal revs all depends on Sea Conditons in my experience
It's often much better to up the revs..(and speed) to get on top of the waves for comfort of crew.. and stability..things like loading.. Wave direction and trim will make a big difference too.
If you have a fuel flow meter (in calmish conditions) it's sometimes interesting to see the fuel figures and revs changing in relation to changing Trim..(Hull angle of attack) where even small changes impact...That will soon indicate to you the most efficient low Drag combination and Cruising speed (revs) for your own Boat,Hull,and set up..although it will alter with loading ect as said
Ultimately you soon get to know your Boat,and it becomes a matter of "feel"
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 01 August 2016, 20:46   #13
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
Quote:
Originally Posted by Maximus View Post
Ideal revs all depends on Sea Conditons in my experience
It's often much better to up the revs..(and speed) to get on top of the waves for comfort of crew.. and stability..things like loading.. Wave direction and trim will make a big difference too.
If you have a fuel flow meter (in calmish conditions) it's sometimes interesting to see the fuel figures and revs changing in relation to changing Trim..(Hull angle of attack) where even small changes impact...That will soon indicate to you the most efficient low Drag combination and Cruising speed (revs) for your own Boat,Hull,and set up..although it will alter with loading ect as said
Ultimately you soon get to know your Boat,and it becomes a matter of "feel"

Adding to what Maxi says, surprisingly with the modern DFI engines, faster actually gives improved economy within limits. I get better economy at 4500 rpm than at 4000 rpm due to the lean burn feature. My Etecs were more efficient at 4700 than at 4200. You need accurate mpg data to find the optimum combination of rpm & trim.


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 02 August 2016, 13:38   #14
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
Does anyone have a good way to get mpg's. Like I said I have a 2012 Mercury 150 fourstroke. I have just a few gauges....speed, rpms tilt and fuel (nothing even for oil pressure or temp).

I do have a Lowrance HDS7 which has a page for engine information, but I don't have it connected to the outboard.

What's the best was to do this. Standalone fuel flow, or Lowrance.
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 02 August 2016, 16:25   #15
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
The best way is to create a nmea2000 network & link the engine to your HDS, this will give you all the info you need. I don't know what you already have, so can't advise on how easy/expensive this would be.


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 02 August 2016, 16:32   #16
Member
 
Join Date: Jun 2010
Posts: 2,934
Engine data on the plotter is the way to go for me, not a separate flow gauge.

If you have nmea currently on the boat that is half the battle?

It will pay for itself over time in fuel saved if you monitor it. It is surprising what a couple of clicks of trim does to the lph usage.
__________________
Xk59D is offline   Reply With Quote
Old 02 August 2016, 17:15   #17
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
I'm at the boat next week, so i'll have a look and update the thread.
__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 03 August 2016, 08:01   #18
Member
 
Country: UK - England
Town: Chesterfield
Boat name: Sea Quell
Make: Picton Cobra
Length: 5m +
Engine: Mercury 150 4 Stroke
MMSI: 235038298
Join Date: Sep 2003
Posts: 1,095
Do you have the smartcraft speed and tach gauges Paul ? They should be able to show fuel flow (ltr/mile) fuel used, oil pressure etc in the lower LCD screens
__________________
Jeff is offline   Reply With Quote
Old 03 August 2016, 10:13   #19
Member
 
Paul_S's Avatar
 
Country: UK - Scotland
Town: Rothesay
Boat name: Solo Angel
Make: Quicksilver
Length: 7m +
Engine: Mercury 150hp
MMSI: 235113072
Join Date: Aug 2015
Posts: 107
Hi Jeff, pictured below is my helm. My gauges are like me...the non smart version. There is a screen on the chartplotter to show engine data, but non of it registers, it doesn't appear to be connected to the outboard.

I may be wrong and it just needs to be configured correctly, but my guess is I don't have the NMEA 2000 network connected between the plotter and the outboard.

If that proves to be the case (and I'm sure it is) I am assuming to connect the 2, I would need a NMEA 2000 wiring and t's (a starter kit?), plus an interface of some kind to connect the merc fourstroke to the wiring.

Any thoughts.

__________________
Quicksilver Activ 705
Paul_S is offline   Reply With Quote
Old 03 August 2016, 11:20   #20
Member
 
Join Date: Jun 2010
Posts: 2,934
in order to tell if you have nmea then take the plotter out and see if anything is plugged into it is probably the simple way to do it.

similarly you could check the engine interface and see if a cable is in there too.

given the plotter doesn't show anything and you have non smart gauges i assume you don't have any NMEA on there so you are bang on in you will need a starter kit and the engine loom potentially.

Literally a few clicks of trim is the difference of 2-3 litres per hour on my rib so depending on your usage it could pay off quickly. i have probably done maybe 800 miles in last year so mines has paid for itself for sure.

cheers
__________________
Xk59D is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 15:33.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.