Thread Tools Search this Thread
Old 05 August 2018, 16:14   #1
Country: USA
Town: Rhode Island
Make: avon
Length: 6m +
Engine: 90hp merc
Join Date: Mar 2006
Posts: 323
honda 50hp gas in oil

i have a honda 50hp motor that the gas is pouring into the oil. i found that the fuel pump would leak behind the plunger right into my crank case. by priming the fuel line it leakes right out from the back. my question is can i just replace the fuel pump and use the same plunger and o ring or do they have to be replaced all at once. thanks

learning to fly is offline   Reply With Quote
Old 06 August 2018, 00:53   #2
Country: UK - England
Town: Liverpool
Length: no boat
Join Date: May 2015
Posts: 183
I have a bf90a. it may be similar. I simply removed the fuel pump. it cannot be dismantled unless you have a anti tamper tool. I couldn't get replacement parts for the pump. I replaced the pump and the large grommet/o ring that seals onto the cam area. The seal was in poor condition. I think the pump plunger and the pump are all one so it was a direct swap. Hope this helps..Nik
matata is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 06:57.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.