Fuel line + ends

[bedajim]

Hi

I'm looking for a fuel line + primer bulb to fit a tohatsu tank and an old 5hp yamaha engine any ideas where I can order one online to get it tomorrow or just the bulb and ends

Jim

[Nos4r2]

Originally Posted by bedajim

Hi

I'm looking for a fuel line + primer bulb to fit a tohatsu tank and an old 5hp yamaha engine any ideas where I can order one online to get it tomorrow or just the bulb and ends

Jim

You're probably better off detouring and buying from a chandlers if you can unless you know exactly which connector you need.

My bladder tanks have Tohatsu connectors and the only way I could get the right one was to take the tank to a chandlers and match one up. The two I bought online as Tohatsu connectors didn't fit.

[Locozodiac]

Originally Posted by bedajim

Hi

I'm looking for a fuel line + primer bulb to fit a tohatsu tank and an old 5hp yamaha engine any ideas where I can order one online to get it tomorrow or just the bulb and ends

Jim

Hello

The Tohatsu female connector will not fit the Yam male connector, the interior pin/needle is completely different to that of the Yam brand.. If you already have the Toh complete fuel line hose, buy a original Toh engine male connector part Nº 3B2-70260-1 to attach it to your Toh gas female connector.

Will need to buy also a Gasket part 336-70112-0 and Nut part 332-70260-1. These two additional parts will tight your new male connector to the Yam's engine front side. Hope the male connector matches the engine hole, if bigger will need to put wahers, if lesser will need to widen. The Toh engine male connector is near 13 mm thick.

The complete Toh primer bulb assembly is part code: 3B7-70200-3

For spare parts contact:

Homepage: http://www.tohatsu-uk.net
Email: sales@tohatsu-uk.net

Happy Sibbing