Reply
 
Thread Tools Search this Thread
 
Old 30 March 2010, 03:26   #1
Member
 
Country: UK - Wales
Town: Tenby
Boat name: O.C.D.
Make: Highfield
Length: 5m +
Engine: Honda 100
Join Date: Oct 2009
Posts: 168
Battery Setup Question

I currently have 2 batteries, 1 connected to each engine and then the electrics connected to just one of the batteries. I recently drained one, figuriung out how to use the toys onboard. The other engine started fine, but took a good 10min to get enough power into the drained battery to start the 2nd engine and i had to attach jump leads whilst at sea.

I have been told to hard wire the -ve's together and then wire the +ve's via an isolator switch. Is this a good option? Or can i connect both engines to one battery and the electronics to the other and then join then the same way. Would the engine battery get over charged being connected to both engines?

Also, can any suggest anywhere that sells decents battery cables? As i need to get longer to move the batteries under the console, hence the decision on which way to connect them up after the move.
__________________
ed_dash is offline   Reply With Quote
Old 30 March 2010, 07:02   #2
Member
 
Cookee's Avatar
 
Country: UK - England
Town: Salcombe, Devon, UK
Boat name: BananaShark
Make: BananaShark
Length: 10m +
Engine: 2xYanmar 260 diesels
Join Date: Mar 2003
Posts: 4,225
What you have described is normal - there are standard switch arrangements that would do what you want off the shelf - For example BEP do this and can also take care of charging the opposite battery as well.
__________________
Cookee
Originally Posted by Zippy
When a boat looks that good who needs tubes!!!
Cookee is offline   Reply With Quote
Old 30 March 2010, 09:32   #3
Member
 
Country: Other
Town: Stanley, Falkland Is
Boat name: Seawolf
Make: Osprey Vipermax 5.8
Length: 5m +
Engine: Etec 150
Join Date: Mar 2006
Posts: 3,726
As above - being able to "bridge" batteries is (should be) part of any twin isolator switch setup. From memory the Halmatics at work have three switches - one for each side and one for bridging the two banks, so when they have one bank of batteries flat (from leaving the bloody engine room lights on again, just to pick a purely random example...) you can start the good engine, bridge, start the flat side, and then have both alternators pumping charge into the flat bank for a while to bring it up, then open the connection and go back to normal.

The only other thing worth mentioning is that in the interests of battery life, it is worth charging any lead-acid batteries properly with a charger on shore power, as an alternator never really brings them right up to full charge if they have been flat.
__________________
A Boat is a hole in the water, surrounded by fibreglass, into which you throw money...

Sent from my Computer, using a keyboard and mouse
BogMonster is offline   Reply With Quote
Old 30 March 2010, 10:54   #4
Member
 
jambo's Avatar
 
Country: UK - Scotland
Town: Girvan & Tayvallich
Boat name: Breawatch
Make: Ribcraft
Length: 5m +
Engine: Mercury 150 F/stroke
MMSI: ex directory!!
Join Date: Sep 2008
Posts: 6,203
RIBase
Ed if you do a search under battery you will find a thread started 15th march by paul E that covers the bases.

J
__________________
jambo
'Carpe Diem'
Member of the ebay Blue RIB cover club
Member of SABS ( Scottish West Division)
jambo is offline   Reply With Quote
Old 30 March 2010, 12:17   #5
Member
 
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by ed_dash View Post
Also, can any suggest anywhere that sells decents battery cables?
Dale Sailing, or you could try a welding equipment supplier.
__________________
Downhilldai is offline   Reply With Quote
Old 30 March 2010, 12:17   #6
Member
 
Country: UK - Wales
Town: Here
Boat name: doggypaddle
Make: Avon 5.4 Searider
Length: 5m +
Engine: yamaha 80
Join Date: Jul 2007
Posts: 1,107
Quote:
Originally Posted by BogMonster View Post
The only other thing worth mentioning is that in the interests of battery life, it is worth charging any lead-acid batteries properly with a charger on shore power, as an alternator never really brings them right up to full charge if they have been flat.
And also as alternators are designed to top up a battery rather than charge it from flat not all types have any form of current regulation.
I found this out recently the hard way after bump starting the landrover when the lights had been left on, The hitachi alternator overheated when charging the flat battery and blew a diode, which in turn took out the regulator, which stopped regulation, the stator then melted, £100 for a
new one, could have been saved if I had charged the battery instead.
interestingly the old lucas ACR alternators don't suffer this problem as the iron core saturates limiting the current to a value the rest of the alternator can cope with.
__________________
I am usually not as green as i am cabbage looking.
doggypaddle is offline   Reply With Quote
Old 31 March 2010, 00:24   #7
Member
 
Country: Other
Town: Stanley, Falkland Is
Boat name: Seawolf
Make: Osprey Vipermax 5.8
Length: 5m +
Engine: Etec 150
Join Date: Mar 2006
Posts: 3,726
That's what happens if you use a nasty foreign Hitachi alternator

I've never seen the problem on quite a lot of Land Rovers with flat batteries over the years but most/all would have been Lucas/Magneti Marelli alts.
__________________
A Boat is a hole in the water, surrounded by fibreglass, into which you throw money...

Sent from my Computer, using a keyboard and mouse
BogMonster is offline   Reply With Quote
Old 31 March 2010, 11:21   #8
Member
 
Country: UK - Wales
Town: Here
Boat name: doggypaddle
Make: Avon 5.4 Searider
Length: 5m +
Engine: yamaha 80
Join Date: Jul 2007
Posts: 1,107
how's anything going to overheat down there? too flippin cold init?
__________________
I am usually not as green as i am cabbage looking.
doggypaddle is offline   Reply With Quote
Old 31 March 2010, 11:34   #9
Member
 
jambo's Avatar
 
Country: UK - Scotland
Town: Girvan & Tayvallich
Boat name: Breawatch
Make: Ribcraft
Length: 5m +
Engine: Mercury 150 F/stroke
MMSI: ex directory!!
Join Date: Sep 2008
Posts: 6,203
RIBase
Quote:
Originally Posted by doggypaddle View Post
how's anything going to overheat down there? too flippin cold init?
Listen DP never mind the FI's you should be up here, what a lovely spell of spring weather!!

J
__________________
jambo
'Carpe Diem'
Member of the ebay Blue RIB cover club
Member of SABS ( Scottish West Division)
jambo is offline   Reply With Quote
Old 31 March 2010, 15:54   #10
Member
 
Country: UK - Wales
Town: Here
Boat name: doggypaddle
Make: Avon 5.4 Searider
Length: 5m +
Engine: yamaha 80
Join Date: Jul 2007
Posts: 1,107
Its not too bad here today, 9.9c and sunny at the moment. did snow yesterday though, briefly still i keep telling myself its uphill from here on
__________________
I am usually not as green as i am cabbage looking.
doggypaddle is offline   Reply With Quote
Old 31 March 2010, 21:44   #11
Member
 
Country: Other
Town: Stanley, Falkland Is
Boat name: Seawolf
Make: Osprey Vipermax 5.8
Length: 5m +
Engine: Etec 150
Join Date: Mar 2006
Posts: 3,726
Quote:
Originally Posted by doggypaddle View Post
Its not too bad here today, 9.9c and sunny at the moment. did snow yesterday though, briefly still i keep telling myself its uphill from here on
It's warmer than that here the last few days
__________________
A Boat is a hole in the water, surrounded by fibreglass, into which you throw money...

Sent from my Computer, using a keyboard and mouse
BogMonster is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 09:30.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.