Suzuki Outboard DF 25 Parts Listings
Originally Posted by NSS
Suzuki don't make a DF25 with PTT.
Scroll down to fig 33/34 (any year)
Next problem: finding one........
A very quick look and it seems to be shared with the 30, and might
be swappable with the one off the 40 (both logged as "type T", but the pics show an ovbviously different assembly. Wheter it has the same fitting dimensions or shared swivel bracket or not I haven't had a chance to look at, but f you can spend a couple of hours on the site with a pencil & paper to hand,
- find your engine, dive into fig 33. Also check figs 30 & 31. Note dowen the part numbers of the clamp, swivel, and any other major bits of hardware.
then do the same at either end of the year scale (so if your engine is a 2005, check 1999 & 2010) this will give you a feel for how changed the PT unit was through the life of the engine. If either are radically different, work back 'til lthey become similar. Use that as a guide for the next bit.
look at other sizes & different years of engine. Compare the parts. The fact the 40 has a different ram pay moore attention to the Clamp & swivel - that will give you a feel for the similarity.
The different pic may be down to one of two reasons: 1) it's a totally different size or 2) they had two suppliers or factories, one building the 25/30 , the other the 40/50.
There is one thing that is reasonably constant - leg lengths - net result is there's only so much you can do with a PT ram in that space.....
Unless a Suzi guru appears before you read this and can give chapter & verse on it.