thanks guys, ya had some crap to settle. anyway talk about timing
timing for a 2 stroke outboard. first you must forget all that you know about timing cuzz it does not apply.
ok on an outboard the more advance timin the harder it's guna pull to 6000rpms,
the more timin it has at 6000 and above the faster it burns down
so we can do one of two things, set timin low at 18-20deg advance, slow on the pull but right about 5200 or so she's guna turn ON and she'll be fine even if i let her go above 9000
OR we can set it at 24deg for the pull to 6000, then when she gets there (6000rpm's) we can use a soilinoid to push it back (timin) so you can still pull to the top and stay there with out the burn down