Reply
 
Thread Tools Search this Thread
 
Old 12 January 2014, 09:50   #1
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,041
Steam Cleaners?

Hi, has anyone got any experience with using these and is there a particular make or model worth buying?

I currently use a jet washer made by karcher but to be honest I need something that takes less time and removes more of the green stuff.

I'm cleaning up my mums place and I have found one in the garage that I know doesn't work, I think it trips the electrics, its made by kranzle and not sure if it's worth even looking at..

Any advice would be more than welcome.

Thank you
__________________
whisper is offline   Reply With Quote
Old 12 January 2014, 09:58   #2
Member
 
Country: Other
Length: no boat
Join Date: Nov 2012
Posts: 476
RIBase
Hi Whisper - thing to note is some steam cleaners are for carpets/fabrics and others are for hard floors / surfaces. The main difference being volume of water/ steam and heat. Vax make a good range of both. But be dead careful on multicolour fabrics. We use one to clean the big boat and it works well on canvas as well.

PS love the stealth rib!!
__________________
- "No matter how big the sea may be, sometimes two ships meet".
indaba1991 is offline   Reply With Quote
Old 12 January 2014, 10:00   #3
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
You may aswell piss on it as use a small domestic Karcher. Larger commercial Karcher stuff is OK, the rest is B&Q fodder.
Kranzle gear is good.
I have a low-end commercial Demon electric, tough as boots.
Brendon are excellent also.

What are you trying to get "green stuff" off of?
__________________
Mollers is offline   Reply With Quote
Old 12 January 2014, 10:05   #4
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,041
Quote:
Originally Posted by indaba1991 View Post
Hi Whisper - thing to note is some steam cleaners are for carpets/fabrics and others are for hard floors / surfaces. The main difference being volume of water/ steam and heat. Vax make a good range of both. But be dead careful on multicolour fabrics. We use one to clean the big boat and it works well on canvas as well.

PS love the stealth rib!!
Thanks due

Maybe steam cleaner is the wrong description, hot pressure washer maybe more correct. its for outside use only, for washing off paths, old oily machinery and maybe a searider

__________________
whisper is offline   Reply With Quote
Old 12 January 2014, 10:14   #5
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,041
Quote:
Originally Posted by Mollers View Post
You may aswell piss on it as use a small domestic Karcher. Larger commercial Karcher stuff is OK, the rest is B&Q fodder.
Kranzle gear is good.
I have a low-end commercial Demon electric, tough as boots.
Brendon are excellent also.

What are you trying to get "green stuff" off of?
I think the washer I have found looks like this but in black, it says 1500 on it.

__________________
whisper is offline   Reply With Quote
Old 12 January 2014, 10:21   #6
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by whisper View Post
I think the washer I have found looks like this but in black, it says 1500 on it.

That's a hot and cold pressure washer, not a steam cleaner. When the hot side plays up, they can be a pain.

Hot is only really useful for grease and fats etc. The correct detergent and high pressure is more effective on masonary etc.

What are you attempting to clean?

Don't dump that Kranzle, I'd have it for parts.
__________________
Mollers is offline   Reply With Quote
Old 12 January 2014, 10:46   #7
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,041
Quote:
Originally Posted by Mollers View Post
That's a hot and cold pressure washer, not a steam cleaner. When the hot side plays up, they can be a pain.

Hot is only really useful for grease and fats etc. The correct detergent and high pressure is more effective on masonary etc.

What are you attempting to clean?

Don't dump that Kranzle, I'd have it for parts.
Stone, block paving and concrete paths.

A shipping container thats next to a hedge thats gone green up one side.

Old PTO driven gang mowers, small tractors and other machinery.

Lots of old trailers.

Everything has stood for a while so need to clean it up and sell it off as seen on ebay for me mum
__________________
whisper is offline   Reply With Quote
Old 12 January 2014, 10:58   #8
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Hokay, spray apply 50% dilute Hypochlorite on all paved areas, work it with a stiff broom, then pressure wash. Hypochlorite is miracle stuff, it's used for cleaning milking parlours. Our 100yo stone cottage came up literally, like new. Get it from any Farmer's merchants.

For greasy mechanical stuff use 50% dilute TFR or chassis cleaner, work around with a stiff brush where you can, don't allow to dry! Pressure wash again. Hot wash would help here, but the TFR should do the work for you.

Not all TFR is the same, I try to get the non- concentrate if poss. Swarfega used to do one that was awesome.

Give me the heads-up when the stuff goes on Ebay will ya?
__________________
Mollers is offline   Reply With Quote
Old 12 January 2014, 12:21   #9
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,041
Quote:
Originally Posted by Mollers View Post
Hokay, spray apply 50% dilute Hypochlorite on all paved areas, work it with a stiff broom, then pressure wash. Hypochlorite is miracle stuff, it's used for cleaning milking parlours. Our 100yo stone cottage came up literally, like new. Get it from any Farmer's merchants.

For greasy mechanical stuff use 50% dilute TFR or chassis cleaner, work around with a stiff brush where you can, don't allow to dry! Pressure wash again. Hot wash would help here, but the TFR should do the work for you.

Not all TFR is the same, I try to get the non- concentrate if poss. Swarfega used to do one that was awesome.

Give me the heads-up when the stuff goes on Ebay will ya?
Thanks Mollers, great info here I had never considered using a chemical first

I'll give that a go, I've been using a small Karcher with a dirtblaster, it seams really powerful but takes way too long.

__________________
whisper is offline   Reply With Quote
Old 12 January 2014, 13:14   #10
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,666
What Mollers said with the Hypo. Apply on a "damp" day at 25-50% and LEAVE it on. Pressure wash it next day. The bleaching action continues as long as it's wet. When buying Hypo, check the batch production date. Don't waste your money on anything over three months old.
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 12 January 2014, 13:31   #11
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by willk View Post
What Mollers said with the Hypo. Apply on a "damp" day at 25-50% and LEAVE it on. Pressure wash it next day. The bleaching action continues as long as it's wet. .
He's cleaning Mother's drive not her teeth!!!
__________________
Mollers is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 11:13.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.