pics of how to build .....

[LeewayComposite]

hi all,
as most of you are aware we built the shearwater cabin and now we are building a new one so thought i would do some pics as it goes through the stages of being made. i remember doing the same for a console which a lot of you liked :0)

first pic attached of the rough ideas and dimentions

[LeewayComposite]

second pic is of all the dimensions cut out of paper to make a small model of the console to see how it will look.

[LeewayComposite]

please note the second pic was taken of the paper model quite a few days after built so is a little scrumpled after been sat on a few times lol

[LeewayComposite]

now we start the build in timber!! there area few ways of doing this. i find it easyer to build a frame first.

[Carl]

looks a bit like a phantom evo console,why dont you copy/borrow one of theres

[Jono]

Originally Posted by LeewayComposite

second pic is of all the dimensions cut out of paper to make a small model of the console to see how it will look.

...this is way too easy........

.
.
.
.
.
.
.
.
.
.....so I'll leave it someone else.

[Dirk Diggler]

Originally Posted by Jono

.
.
.....so I'll leave it someone else.

I see, you load the gun, someone else pulls the trigger eh, where's jonni fuller when you need him!

[Jonny Fuller]

I thought you did all your designs in CAD?

[Jono]

Originally Posted by Jonny Fuller

I thought you did all your designs in CAD?

CAD?... Copy Anyones Design?

[Dirk Diggler]

Originally Posted by Jonny Fuller

I thought you did all your designs in CAD?

Create Another Disaster