Pacific 22 Jenny Haniver
Thought i`d post a couple of pictures of my Pacific 22, having just launched it after a bit of a re-fit.
The main job was replacing the entire foredeck area(engine box forward) with epoxied 8mm marine ply, a million stainless screw and a few tubes of sikkaflex. Overcoated with a couple of coats of Interdeck. I also took the opportunity to fit a deck hatch forward of the consul with a conveniently sized (clean!)fish-box fitted below.
The deck area aft of the engine box has been replaced with 4mm aluminium treadplate.
I`m quite pleased with how the boat is looking and apart from one or two things not working(engine rev counter gauge, bilge pump float switch!) Considering the work was carried out in the open over the winter under a bloody sychamore tree(still sweeping out bits!) it`s just a relief to get it in the water.