And made a console pod to house his new toy
After aquiring a new Lowrance 3300c plotter i have had to find somewhere to house it,and anybody who knows a Searider console knows that any more than 1 unit is a no no!
and this has been the result.
I started by making up a mock-up out of cardboard of what i wanted then made the mould from malamine board and rounded the edges with plastecine. I then removed the front so that the back could be glassed up then put the front on and removed the back as to keep the mould together and cut the holes for the units to allow the access to glass up the rear. it is then finished with wet and dry.
The result i quite good.
(sorry for the poor quality pictures)