Wanted: Suzuki DF140 Propeller

[diver 1]

Does anyone have a Suzuki propeller they no longer want?

I'm after a 14 x 20 or 14 x 21 or 14 x 22 possibly.

To be honest any of the above would do the trick. Stainless or alloy

Thanks

[AJ.]

Got a 14 X 21 refurbished not been used since if your interested


Sent from my iPhone using RIB Net

[diver 1]

Yeah that'd do it. I see you have the same boat as me. What prop are you running then?

How much do you want for this?

[AJ.]

I run a stainless solas 4 blade 13 X 21 loose a smidge of top end but good in the corners and rough.

Looking on eBay new they are £155.

Happy to go with £95 posted.

Feel free to PM

Alex


Sent from my iPhone using RIB Net

[Pikey Dave]

Originally Posted by AJ.

I run a stainless solas 4 blade 13 X 21 loose a smidge of top end but good in the corners and rough.

Looking on eBay new they are £155.

Happy to go with £95 posted.

Feel free to PM

Alex


Sent from my iPhone using RIB Net

Alex, which 4 blade prop do you use, is it the Titan4? What are your thoughts on it?



Sh1t happens

[AJ.]

Hi PD, not sure which one it is as it just says Solas on it. I think it is really good grips really well in the corners, gets up on the plane quicker than stock prop and is bang on 6000 rpm WOT. Maximus, whisper and Matt H know the boat well they have all been impressed with its bite.


Sent from my iPhone using RIB Net

[Bucksribster]

I've got one in the garage. I'll look up the size / pitch tomorrow.

[diver 1]

Cheers for the advice. I've found an old mercruiser 3 x 13 x 21 in my garage, doesn't quite match the gear casing diameter, but it fits and spins freely so I fitted it and tested it today. Its like a new boat! Goes about 5 knots quicker and much better acceleration.

Why do Suzuki recommend 14" diameter props - they spin way to close to the AV plate!

[AJ.]

No worries, I had just done a garage clear out which is why it was to hand. Will put it on eBay.

Happy boating.

Alex


Sent from my iPhone using RIB Net

[whisper]

Originally Posted by AJ.

Hi PD, not sure which one it is as it just says Solas on it. I think it is really good grips really well in the corners, gets up on the plane quicker than stock prop and is bang on 6000 rpm WOT. Maximus, whisper and Matt H know the boat well they have all been impressed with its bite.


Sent from my iPhone using RIB Net

Don't tell AJ this but his 4 blade SS prop is out of this world, can't wait to get one and corner like AJ G force in a 585... Just awesome!


www.customrib.co.uk

[Pikey Dave]

Originally Posted by whisper

Don't tell AJ this but his 4 blade SS prop is out of this world, can't wait to get one and corner like AJ G force in a 585... Just awesome!


www.customrib.co.uk

I'm guessing it's the Rubex HR4 as its the only 4 blade stainless one that I can see that comes in a 13" dia. AJ, can you see any other numbers stamped on it?


Sh1t happens

[diver 1]

One of these then?

https://www.propellerdepot.com/solas...ss-9453-130-21

Anywhere in the UK sell these?

[Pikey Dave]

Originally Posted by diver 1

One of these then?



https://www.propellerdepot.com/solas...ss-9453-130-21



Anywhere in the UK sell these?

http://www.steeldevelopments.net/50-...-d-series.html


Sh1t happens

[diver 1]

Cheers PD!

[AJ.]

Originally Posted by Pikey Dave

I'm guessing it's the Rubex HR4 as its the only 4 blade stainless one that I can see that comes in a 13" dia. AJ, can you see any other numbers stamped on it?


Sh1t happens

There is nothing written on the outside other than Solas their logo and the prop size.

I think your going to be pretty safe PD ordering a solas 4 blade even if it is a different model provided the pitch and diameter is the same as mine can't be much else different.


Sent from my iPhone using RIB Net