Stainless steel welder 3 hrs use

PeterR · 11 November 2010, 18:20

Complete made in uk used 3hrs complete with gauges £300

biffer · 12 November 2010, 07:40

why are you selling it, has it got the instructions with it, i'm interested

PeterR · 12 November 2010, 09:00

Quote:

Originally Posted by biffer

why are you selling it, has it got the instructions with it, i'm interested

Hello Biffer,Yes i had the instructions somewhere havent seen them for a while i can look for them.So i would assume not at this point.They are not hard to use and the same as any HF welder i would think .I helped design and fabricate a S/Steel chair for use in the sea and swimming pool ,Also a dome for over an above ground swimming pool and through its design i would need to make slight alterations and it was easier to try myself although i had never welded before.the project finnished a while ago and the contract with BOC for the argon gas has been canselled.I shall probably never use it as my welding is not good enough other than tacking so no point in keeping it.Its a dam good machine.It Cost a lot more but its now second hand.you are welcome to try it before buying but i have no gas but you could bring you own .Regards Peter

biffer · 12 November 2010, 10:31

find the book, i'll have it, we'll make some arrangements later to pay you and get it, ta, biff

PeterR · 12 November 2010, 18:26

It is forsale at present without the instrustion booklet on first come basis.Although that means anyone only has to say they want it and i will keep it for them for a short time.Although i think it may have been Rogue Wave who put his name on it before so if anyone is in contact with him could they call and ask him .Thanks

Matt · 12 November 2010, 20:30

Whereabouts in essex are you?

biffer · 13 November 2010, 09:36

Quote:

Originally Posted by PeterR

It is forsale at present without the instrustion booklet on first come basis.Although that means anyone only has to say they want it and i will keep it for them for a short time.Although i think it may have been Rogue Wave who put his name on it before so if anyone is in contact with him could they call and ask him .Thanks

carry on then, you had my offer!!

willk · 13 November 2010, 11:07

Quote:

Originally Posted by biffer

carry on then, you had my offer!!

Am I the only one who can hear you Biff?

I'm sure the manufacturer would email you a pdf of the manual.

biffer · 13 November 2010, 11:16

Quote:

Originally Posted by willk

Am I the only one who can hear you Biff?

I'm sure the manufacturer would email you a pdf of the manual.

you'd have thought with 3hrs use the manual would have been at hand, Neil Harvey said he would pick it up for me so everything would have been done and dusted, if he can't be bothered to look for a manual then let someone else have it, i haven't the time to be buggered about

PeterR · 13 November 2010, 12:03

Hello Biffer,Its quite funny really when you think about it that you really have the arse.Did you get out of bed the wrong side.Theres me selling an item in mint condition for a price but without the manual.i could like i have just done looked up the website writen on the welder from the photo that i took a few days ago and can have like you could have had a set of instruction just like that and like you, i couldnt be arsed.So were the same except i was selling and you were buying.And I,m not selling it to you and your not buying from me.Best Regards Peter.P.S. A photo of the gauges i.e Flow meter /gas gauge that i have just taken which also shows the condition

PeterR · 13 November 2010, 12:06

Quote:

Originally Posted by willk

Am I the only one who can hear you Biff?

I'm sure the manufacturer would email you a pdf of the manual.

Well at the time i guess yes, as surely i can be forgiven for not going on Ribnet every day

PeterR · 13 November 2010, 12:08

OH

and the photo

biffer · 13 November 2010, 13:27

Quote:

Originally Posted by PeterR

Hello Biffer,Its quite funny really when you think about it that you really have the arse.Did you get out of bed the wrong side.Theres me selling an item in mint condition for a price but without the manual.i could like i have just done looked up the website writen on the welder from the photo that i took a few days ago and can have like you could have had a set of instruction just like that and like you, i couldnt be arsed.So were the same except i was selling and you were buying.And I,m not selling it to you and your not buying from me.Best Regards Peter.P.S. A photo of the gauges i.e Flow meter /gas gauge that i have just taken which also shows the condition

you and i are worlds apart, no where near the same, firstly i wouldn't sell the welder without downloading the manual, secondly i wouldn't have forgot who wanted it in the first place, thirdly, which relates to the second one, i wouldn't have posted it and waste time, the biggest difference between us is i have the money and (as others on here will tell you have a very nice state of the art welder), so it was only going to be a spare, my original offer still stands, or we'll leave it and see how many posts we can bring it up to

martini · 13 November 2010, 13:43

Biffer can I ask what you're current set up is for tigging?

biffer · 13 November 2010, 14:19

Quote:

Originally Posted by martini

Biffer can I ask what you're current set up is for tigging?

i've got a kempii 250amp ac/dc with twin torches (big one, 1.5 tung and little one 1mm) with water cooling facilities, lovely machine, all the usual bits slope in and out gas and amp, sine wave adjustment for cleaner ali welding, single and 3 phase, etc, touch wood it's let me down

PeterR · 13 November 2010, 16:48

Quote:

Originally Posted by biffer

you and i are worlds apart, no where near the same, firstly i wouldn't sell the welder without downloading the manual, secondly i wouldn't have forgot who wanted it in the first place, thirdly, which relates to the second one, i wouldn't have posted it and waste time, the biggest difference between us is i have the money and (as others on here will tell you have a very nice state of the art welder), so it was only going to be a spare, my original offer still stands, or we'll leave it and see how many posts we can bring it up to

Well My mistake.firstly when you posted ,find the instructions i mistook that you were being arsey.Where does the comment youve got the money come from .You know nothing about what i have and if you think you do i think youve been misguided.i hope it was a case that i,ve caught you having a bad few days .I will agree with you from reading the above comments we are worlds apart .I really have no wish to slag you down and more than happy to get back to more positive posting

biffer · 13 November 2010, 16:59

Quote:

Originally Posted by biffer

i've got a kempii 250amp ac/dc with twin torches (big one, 1.5 tung and little one 1mm) with water cooling facilities, lovely machine, all the usual bits slope in and out gas and amp, sine wave adjustment for cleaner ali welding, single and 3 phase, etc, touch wood it's let me down

i left out "never" in let me down

markg · 13 November 2010, 20:28

http://www.youtube.com/watch?v=TuVN3...eature=related

PeterR · 14 November 2010, 20:00

Sold

captainpugwash · 14 November 2010, 22:34

Quote:

Originally Posted by PeterR

Sold

Go on then. Who did you sell it to? Give us a clue Pete.