For Sale: Stainless seat back x2 £225.00

[PeterM]

Due to some planned upgrades to my mini ribcraft I will shortly have two SS seat backs for sale .

One will have the padded seat back in black) the other wont . Probably a few weeks before I can let them go ( need to get new stuff upholstered)

Will get some pics shortly ( boat is with Biff)

But looking for £225 for the pair.

[PeterM]

Two like this. One has black backrest attached.

[1eyedjim]

Would you sell just the one with the cushion? Do you have the dimensions of what console width it will fit?

[PeterM]

Originally Posted by 1eyedjim

Would you sell just the one with the cushion? Do you have the dimensions of what console width it will fit?

Yep - they are from Ribcraft so will fit their standard bases . I'll measure when I get in after work later. I'm sure they could be 'tweaked a little to fit others.

£120 for the one with the cushion attached ?

[PeterM]

Measured last night but then lost internet connection !

So they are 22cm across the top bolts and 24cn across the bottom - but they could be 'tweaked' to be 22 across the bottom.

The legs have a slight inwards cant coming to 20.2cm at the narrowest point .

[1eyedjim]

Ace I will measure my console tonight and let you know. Is the upholstery in good condition?

[PeterM]

Originally Posted by 1eyedjim

Ace I will measure my console tonight and let you know. Is the upholstery in good condition?

Yep - had it re-done in may this year when I got the boat.

Pics of it attached to the boat (which it still is) ;

http://www.rib.net/forum/f16/ribcraf...a-61958-3.html

Pete

[1eyedjim]

Hi Pete

just measured my console and its 430mm wide so nearly double the width of the rest so dont think it will work for how i wanted it

thank you for your help though

jim

[9D280]

Peter,

I'll need to measure my console base, but if you are Ok to split, how much for the simple frame one? (I have a pair of cushions one of which will need a bespoke base, the other might work with this frame - console permitting.


And in a totally random chance - are you likely to be "Hants" rather than Dorset tomorrow? - I'm comming down on a bit af a flying visit day trip....

[PeterM]

Originally Posted by 9D280

Peter,

I'll need to measure my console base, but if you are Ok to split, how much for the simple frame one? (I have a pair of cushions one of which will need a bespoke base, the other might work with this frame - console permitting.


And in a totally random chance - are you likely to be "Hants" rather than Dorset tomorrow? - I'm comming down on a bit af a flying visit day trip....

No probs to split - how does £110 for the one without the cushion ?

I'll be a day out in Hants - Prob Portsmouth / Southampton on Friday ( need to get the other one off the boat which is at Biffs)

[9D280]

I'll PM you......

[9D280]

What's the vertical separation of the two mounts?

I have a rather more tapered 23/30cm width with a 13cm drop between them (Humber console - tapers out remarkably then as good as vertical to the floor)

I think if yours are in the 10-11 separation ballpark I could probably "tweak" it, if any more I'm likely on to the proverbial plumbs as the base then has a reasonably sharp angle and drops vertically.

[PeterM]

Finally got both these in the same place now. Just need them gone and out of the way now.......