Ribtec 535, this hull has substantial damage...
The deck has come away from the hull and has been unsuccessfully repaired by just fibreglass, the deck has tired to punch through the hull which has caused a split along the chine and the hull near the tube flange has tried to fold causing another split which runs under the tube tape.
An independent survey has been carried out through the last owner and the report was that the transom is 100% saturated with water, this is in keeping with lose transom bolts and a previous repair of capping the transom both sides in stainless steel.
The tubes will need to be partly removed, the deck will have to be replaced and the hull needs to be repaired both inside and out so this is not for the faint hearted. The transom also needs to be replaced..
The good news is it has an A-Frame, Console and the tubes look good
Open to offers by PM
Collection from Southampton.