Reply
 
Thread Tools Search this Thread
 
Old 31 October 2014, 18:55   #11
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
The reason I asked about the colour was I bought a Osprey Viper 525 that was going to be the original RIB 4 Macmillan, it was blue tubes, white hull and a mariner 100hp and an frame too.

After getting feedback about me loaning the money to the project and then taking it back after the sale I decided to sell it.

It might be the same one, but several were made at the time funded by the National Lottery for dive clubs, these boats were made by Northern Diver.
__________________

__________________
whisper is offline   Reply With Quote
Old 31 October 2014, 19:56   #12
Member
 
pilotwillie's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: Cesa
Make: Osprey Viper
Length: 5m +
Engine: Mariner 100hp 2s
Join Date: Sep 2013
Posts: 133
RIBase
Very interesting. It's a yes for the Mariner too. I'll inspect the console again, closer, although it's definitely now white !!!

If it is her then I'm hoping you can confirm its all good news.

You may well be the guy 'from down south' that the seller referred to ! I bought it somewhere close to Leicester, can't remember the town.

If you know of any more history, good or bad, either about this specific hull or in general, then I'd be really interested to hear.


Sent from my Aye Phone using RIB Net
__________________

__________________
pilotwillie is offline   Reply With Quote
Old 01 November 2014, 03:54   #13
Member
 
Country: UK - England
Town: Margate / Ramsgate
Boat name: Ballistic
Make: Ballistic
Length: 7m +
Engine: Yam HPDI 250
Join Date: Feb 2002
Posts: 2,835
Good hull. If she got a 100, that'll be a nice pairing.

I'd think you need a size 4 ducks back (out of stock) we measured up for a 5.8 humber and allowing for going up and over front console and rear seats it's 6.4 L, right on the limit of a size 4 (pop 6.5 into the size calculator and it says size 5).

On the basis a cover is better than no cover a size 5 is in the post.
__________________
Daniel is offline   Reply With Quote
Old 01 November 2014, 06:05   #14
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
Found some pics...
Attached Thumbnails
Click image for larger version

Name:	DSC_2403.jpg
Views:	104
Size:	135.2 KB
ID:	100381  
__________________
whisper is offline   Reply With Quote
Old 01 November 2014, 06:40   #15
Member
 
pilotwillie's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: Cesa
Make: Osprey Viper
Length: 5m +
Engine: Mariner 100hp 2s
Join Date: Sep 2013
Posts: 133
RIBase
Yep, I'd say that's my baby ! Console obviously been sprayed at some time, looks ok to me though.

Now looks like this....

Click image for larger version

Name:	ImageUploadedByRIB Net1414838297.619748.jpg
Views:	127
Size:	32.8 KB
ID:	100382

I'm hoping to swap the rear bench out with hopefully 2 x double jockeys (4 kids to seat !!!), but it won't be in this years budget !


Sent from my Aye Phone using RIB Net
__________________
pilotwillie is offline   Reply With Quote
Old 01 November 2014, 06:42   #16
Member
 
pilotwillie's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: Cesa
Make: Osprey Viper
Length: 5m +
Engine: Mariner 100hp 2s
Join Date: Sep 2013
Posts: 133
RIBase
Quote:
Originally Posted by Daniel View Post
Good hull. If she got a 100, that'll be a nice pairing.

I'd think you need a size 4 ducks back (out of stock) we measured up for a 5.8 humber and allowing for going up and over front console and rear seats it's 6.4 L, right on the limit of a size 4 (pop 6.5 into the size calculator and it says size 5).

On the basis a cover is better than no cover a size 5 is in the post.

Thanks for this Daniel.


Sent from my Aye Phone using RIB Net
__________________
pilotwillie is offline   Reply With Quote
Old 01 November 2014, 08:50   #17
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
Yep that's her, she's solid

Owned by a dive club from new until I bought it.

She wasn't used much though.

A good looking boat and loads of room on the deck. I polished the hull, made the backrest as it was missing. I also had to replace the damper on the trailer.
__________________
whisper is offline   Reply With Quote
Old 01 November 2014, 10:52   #18
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
More pics...
Attached Thumbnails
Click image for larger version

Name:	DSC_2405.jpg
Views:	108
Size:	124.8 KB
ID:	100389   Click image for larger version

Name:	DSC_2406.jpg
Views:	99
Size:	170.0 KB
ID:	100390   Click image for larger version

Name:	DSC_2407.jpg
Views:	95
Size:	149.4 KB
ID:	100391   Click image for larger version

Name:	DSC_2414.jpg
Views:	96
Size:	160.8 KB
ID:	100392   Click image for larger version

Name:	DSC_2415.jpg
Views:	101
Size:	86.7 KB
ID:	100393  

__________________
whisper is offline   Reply With Quote
Old 01 November 2014, 11:02   #19
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
Last ones...
Attached Thumbnails
Click image for larger version

Name:	DSC_2409.jpg
Views:	95
Size:	159.9 KB
ID:	100394   Click image for larger version

Name:	DSC_2411.jpg
Views:	93
Size:	138.0 KB
ID:	100395   Click image for larger version

Name:	DSC_2420.jpg
Views:	84
Size:	227.6 KB
ID:	100396  
__________________
whisper is offline   Reply With Quote
Old 01 November 2014, 14:08   #20
Member
 
pilotwillie's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: Cesa
Make: Osprey Viper
Length: 5m +
Engine: Mariner 100hp 2s
Join Date: Sep 2013
Posts: 133
RIBase
Managed to inspect the console closer and you can just make out the original blue round an edge of the for'd hatch, spray job. Apart from that, don't think much else has changed. All the electronics etc. were passed on to me, including the dive bottle rack ! The hour meter shows 142.3, but don't know if I trust this on a 20yr old boat and engine. Although I don't think the seller used it much either !

I think it was the seller that mounted the bench seat, which has a hinged backrest and cool box storage with drain hole. Screwed down.

Not had it out much myself due to a knackered power tilt unit on the '93 Mariner 100 which is proving a PITA to get sourced / fixed. That'll be my next post !

And no transom bung ! Hopefully my DIY skills will be adequate to insert one.

The 'up and over' max width across the jockey seat / bench is 112' so I might have to go for one of the longer covers to get the width coverage. The main topic of this thread !!!!!

It's a nice feeling for me to know that she was nearly the MacRIB ! Although there's no way I'll ever be able to get her to the standard that that mighty vessel was taken to. That was simply superb.


Sent from my Aye Phone using RIB Net
__________________

__________________
pilotwillie is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 03:35.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.