Free & cheap bits of midsection - Yam, Suz & Merc/ Mariner

[9D280]

Ok, time to clear the garage. Various midsection lumps aquired along with various bits of PT.

Free:

- Longshaft leg to suit 50/ 60 Hp Merc / Mariner Clamshell, Includes exhaust plate, but not the water or exhaust pipes. Mariner grey. A/V mounts shot, hence free.

- Clamp / Swivel assy to suit 50/ 60 Hp Merc / Mariner Clamshell, external ram type, Merc Black, tatty but works. Rams could probably use a new set of seals, hence free.



Cheap:

Bottom mount covers for Mariner Clamshell incl bases & fasteners, one spring missing. - £5.

Clamp / Swivel bracket for 75Hp Yam. Including tilt tube. NO PT OR MANUAL RAM assy. "late 90s grey", paintwork in good nick. £30. I think this might fit any 2- stroke 50-90 Hp between about '87 and the end of 2- stroke. May split.

Suz DT25 or DT30 longshaft leg / clamp / swivel assy. Early 90s vintage. No water pipe, exhaust pipe or driveshaft. Stbd clamp broken at screw , but holes for bolt mounting OK. Ful set of reverse latch gubbins included. £30

Suz DT30 1989 vintage CDI. Believed working, not tested, hence £40

[Mercury]

Originally Posted by 9D280

Ok, time to clear the garage. Various midsection lumps aquired along with various bits of PT.

Free:

- Longshaft leg to suit 50/ 60 Hp Merc / Mariner Clamshell, Includes exhaust plate, but not the water or exhaust pipes. Mariner grey. A/V mounts shot, hence free.

- Clamp / Swivel assy to suit 50/ 60 Hp Merc / Mariner Clamshell, external ram type, Merc Black, tatty but works. Rams could probably use a new set of seals, hence free.



Cheap:

Bottom mount covers for Mariner Clamshell incl bases & fasteners, one spring missing. - £5.

Clamp / Swivel bracket for 75Hp Yam. Including tilt tube. NO PT OR MANUAL RAM assy. "late 90s grey", paintwork in good nick. £30. I think this might fit any 2- stroke 50-90 Hp between about '87 and the end of 2- stroke. May split.

Suz DT25 or DT30 longshaft leg / clamp / swivel assy. Early 90s vintage. No water pipe, exhaust pipe or driveshaft. Stbd clamp broken at screw , but holes for bolt mounting OK. Ful set of reverse latch gubbins included. £30

Suz DT30 1989 vintage CDI. Believed working, not tested, hence £40

Really interested in the free bits, Longshaft leg, clamp swivel. ( I am half Scotsman half Yorkshire ) But you are so far away. where abouts are you?

[Mercury]

Originally Posted by 9D280

Ok, time to clear the garage. Various midsection lumps aquired along with various bits of PT.

Free:

- Longshaft leg to suit 50/ 60 Hp Merc / Mariner Clamshell, Includes exhaust plate, but not the water or exhaust pipes. Mariner grey. A/V mounts shot, hence free.

- Clamp / Swivel assy to suit 50/ 60 Hp Merc / Mariner Clamshell, external ram type, Merc Black, tatty but works. Rams could probably use a new set of seals, hence free.



Cheap:

Bottom mount covers for Mariner Clamshell incl bases & fasteners, one spring missing. - £5.

Clamp / Swivel bracket for 75Hp Yam. Including tilt tube. NO PT OR MANUAL RAM assy. "late 90s grey", paintwork in good nick. £30. I think this might fit any 2- stroke 50-90 Hp between about '87 and the end of 2- stroke. May split.

Suz DT25 or DT30 longshaft leg / clamp / swivel assy. Early 90s vintage. No water pipe, exhaust pipe or driveshaft. Stbd clamp broken at screw , but holes for bolt mounting OK. Ful set of reverse latch gubbins included. £30

Suz DT30 1989 vintage CDI. Believed working, not tested, hence £40

Really interested in the free bits, Longshaft leg, clamp swivel t&t ( I am half Scotsman half Yorkshire ) But you are so far away. where abouts are you?

[9D280]

You got PM. (or should have, will try again.......)

[9D280]

OK, you won't be surprised to hear that Mercury has taken the Merc bits, but I'll be doing a round trip to London-ish beginning of next week, so if anyone wants any of the following, I could deliver to a sensible distance of M74/A1/M1/ M6 or anywhere inbetween on Monday / Tues.

Following bits still avaialble:

Bottom mount covers for Merc / Mariner Clamshell incl bases & fasteners, one spring missing. - £5.

Clamp / Swivel bracket for 75Hp Yam. Including tilt tube. NO PT OR MANUAL RAM assy. "late 90s grey", paintwork in good nick. £30. I think this might fit any 2- stroke 50-90 Hp between about '87 and the end of 2- stroke. Can split.

Suz DT25 or DT30 longshaft leg / clamp / swivel assy. Early 90s vintage. No water pipe, exhaust pipe or driveshaft. Stbd clamp broken at screw , but holes for bolt mounting OK. Ful set of reverse latch gubbins included. £30

Suz DT30 1989 vintage CDI. Believed working, not tested, hence £40