Reply
 
Thread Tools Search this Thread
 
Old 07 June 2012, 15:20   #1
Member
 
Country: UK - N Ireland
Town: bangor
Length: under 3m
Join Date: Jun 2012
Posts: 3
any info on bsquare 2.9 valves

hi

extremely new to sailing and the site, have a pro shore rib that has been given to me minus the pump and valves (after a long search on the web to find replacements i beginning to see why it was given to me).

would anybody know if and where i could go about find a replacent pump and value set???

thanks in advance
dave
__________________

__________________
dcrib is offline   Reply With Quote
Old 07 June 2012, 17:04   #2
Member
 
Country: UK - England
Town: South Yorkshire
Boat name: Condor
Make: Proshore
Length: under 3m
Engine: Merc 3.5
MMSI: 235907337
Join Date: May 2012
Posts: 26
Hi dave
I have a proshore 2.9 too, the pump fitting for the valves is a bayonet type of connector. I bought one of the stirrup type pumps and that had the correct fitting.

I have seen the same valves on a website as I was browsing can't remember what site ATM. I've got a spare valve I can photograph for you if that helps but I think if you follow this Link Ron Hale Marine Ltd - Inflatable Boat Spares and Accessories The 16 quid bellows footpump and the Bravo 2001 valve looks like the one on my boat.

Bob
__________________

__________________
Bobh is offline   Reply With Quote
Old 08 June 2012, 03:47   #3
Member
 
Country: UK - N Ireland
Town: bangor
Length: under 3m
Join Date: Jun 2012
Posts: 3
Thanks a lot for the info Bob, i'll get these ordered.
__________________
dcrib is offline   Reply With Quote
Old 08 June 2012, 04:10   #4
Member
 
Country: UK - England
Town: South Yorkshire
Boat name: Condor
Make: Proshore
Length: under 3m
Engine: Merc 3.5
MMSI: 235907337
Join Date: May 2012
Posts: 26
You're welcome dave don't forget to get a valve key too

Bob
__________________
Bobh is offline   Reply With Quote
Old 08 June 2012, 04:45   #5
Member
 
Country: UK - N Ireland
Town: bangor
Length: under 3m
Join Date: Jun 2012
Posts: 3
which would be? im a complete newbie.
__________________
dcrib is offline   Reply With Quote
Old 08 June 2012, 04:59   #6
Member
 
Country: UK - England
Town: South Yorkshire
Boat name: Condor
Make: Proshore
Length: under 3m
Engine: Merc 3.5
MMSI: 235907337
Join Date: May 2012
Posts: 26
This look like the same one Dave " Valve Spanner for XS/Eco 2010" scroll down the page on the link I gave you, might be worth a phone call just to check it WILL fit the valves.

On a further note has you're boat still got the conformaty plate on the transom? If not I can let you have a pic

Regards
Bob
__________________

__________________
Bobh is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 12:12.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.