Aerospace spec Adhesive Lined Heatshrink

[Nasher]

Great for sealing wiring connections in consoles etc this is top spec adhesive lined heatshrink, with a big shrink ratio and exceptional protective properties. It’s also fully Flame retardant and approved by Boeing.

It’s not available to the general public in the UK, and is usually only available in large quantities to aerospace users.

Suitable for use in harsh environments, as the tubing shrinks, the adhesive lining melts and flows to fill all voids and create a complete seal against moisture, oils, chemicals and other fluids.

Full spec:-
Adhesive-Lined, Polyolefin Heat-Shrinkable Tubing.
11.56mm ID in expanded state – as supplied.
4:1 shrink ratio.
Shrink temperature 135°C.
Flame-retardant tubing jacket and adhesive provide full flame-retardancy.
Mechanically tough, the tubing provides strain relief and abrasion protection of wire splices, terminals and other components.
Thick high-performance adhesive lining offers permanent sealing of splices, fusible links, terminals and in-line components
RoHS compliant

I have 10 x 1200mm long lengths available, that would go a long way when cut into shorter lengths for sealing cable joints and connections.

£6.00 per length inc postage to the UK.

Nasher.

[Jeff]

I'll take 2 please
Let me know if Paypal is ok and details
Jeff

[Nasher]

All gone now I'm afraid.

If anyone really wants some let me know and I'll see what I can do.

Nasher.

[Steve_B]

If you can get more, I would be interested
Steve

[Nasher]

Steve

I'll see if I can find a couple more pieces.

Nasher

[Downhilldai]

Originally Posted by 250kts

If you can get more, I would be interested
Steve

Me too, Nash

[bingomike]

Me too, I will take some off you - got to sort out my wiring Mike

[Nasher]

Sorry all.

Looks like that's it at the moment.

I'll update this thread if I manage to get hold of some more.

Nasher.

[Nasher]

I’ve finally managed to get hold of some more of this top spec Heatshrink.

I have 25 x 1200mm lengths of the size mentioned above, supplied in an expanded state of 11.56mm ID, and just 5 x 1200mm lengths of the same spec but supplied in an expanded state of 17.79mm ID.

The 11.56mm ID is still £6 per length, and the 17.79mm ID will be £7.50 per length.
Unfortunately I’m going to have to add £1 to each batch sent out to cover some of the postage costs.

Let me know if you need any.

Nasher.

[GreigS]

I could do with a couple of lengths , let me know how you would like to be payed etc.
Cheers

Greig

[Rogue Wave]

can I have 3 lengths of eacj abd do you take paypal

merrry Xmas by the way

[Downhilldai]

I'd like a couple of lengths of the smaller stuff please, if there's any left?

[Maximus]

I would like a couple of each please Nash,if poss.

[Nasher]

So, it looks like Rogue Wave and Maximus have bagged the larger stuff, so thats all gone now I'm afraid, and there is still 16 lengths of the smaller stuff left after Downhilldai's had his.

I'll PM some payment instructions etc.

Thanks Guys

Nasher.

[Rokraider]

I would like a couple of lengths please if you have any left?

[Cypman]

Could I please have two if you have any left ?

[Nasher]

Sorry Guys, been away for a couple of days.

I've plenty of the smaller suff available, so I'll send out some PMs.

Nasher.

[Nasher]

Just a few lengths of the smaller size still available.

Nasher

[Nasher]

Have just a few lengths of both sizes of heatshrink available again.

I've also got quite a bit of this in 6, 8 and 10mm sizes if anyone needs some to make up harnesses.
EXPANDO HTNS-L/HO 10
PRO POWER|NOMEX10OEDB50R|SLEEVING, BRAID, 50M | Farnell United Kingdom
at £2.50/M

Plus this in the 3/4 and 1/8in nominal sizes.
BENTLEY HARRIS EXPANDO HR PLUS
High Temperature Flame Retardant Braided Sleeving, Expando HR Plus Plenum Expandable Braided Sleeving, abrasion protection - BuyHeatShrink.com
£2.50/M for the small size and £3.50/m for the big stuff.
This stuff is really good for sleeving harnesses giving a really proffesional look and protecting the cables well.

Nasher.