Tarbh
19 May 2009, 17:58
I'm about to mount a remote antenna for my GPS 550s.
From the installation instructions it states "Mount the antenna at least 3ft away from the path of any radar beam or a VHF radio antenna".
The radar isn't an issue (not planning on fitting one!), but the mounting plate on the top of my A-frame isn't that big, so i'll not be able to get the separation from my VHF antenna the instructions suggests.
I've has a trawl through the "rib gallery" section...and there are a few photo's of GPS antenna's mounted close to VHF antenna's...
http://rib.net/forum/attachment.php?attachmentid=27528&d=1181510132
Will this be a problem?...and will it effect the operation of the GPS?...
Thanks
John
From the installation instructions it states "Mount the antenna at least 3ft away from the path of any radar beam or a VHF radio antenna".
The radar isn't an issue (not planning on fitting one!), but the mounting plate on the top of my A-frame isn't that big, so i'll not be able to get the separation from my VHF antenna the instructions suggests.
I've has a trawl through the "rib gallery" section...and there are a few photo's of GPS antenna's mounted close to VHF antenna's...
http://rib.net/forum/attachment.php?attachmentid=27528&d=1181510132
Will this be a problem?...and will it effect the operation of the GPS?...
Thanks
John